5-Section 6FT Stainless Steel Flagpole Kit

Supports Up to 3x5 Flag Size.

White Variant — Finish Note

This variant features a powder-coated white finish over a stainless steel core. The coating provides a clean, bright appearance while maintaining corrosion resistance. Minor surface variation in sheen is normal for powder-coated metal and does not affect performance.

Included Hardware Checklist

★ Stainless Steel Flagpole (Adjustable 15 to 72 Inches / 6FT) × 1

★ Aluminum Alloy Tangle-Free Spinners × 2

★ Aluminum Mounting Bracket × 1

★ Mounting Screws × 4

★ Hex Key (Allen Wrench) × 1

Note: Flag not included. No additional tools required for standard installation.

Mounting Surface Requirements

The included bracket is designed for the following surfaces:

✔ Wood siding, wooden porch posts, and deck rails

✔ Vinyl siding (use appropriate vinyl anchor hardware, not included)

✔ Masonry or brick walls (use masonry anchors, not included)

✘ Not recommended for hollow drywall without wall anchors

Mounting surface should support a minimum of 10 lbs static load. Ensure the surface is flat and the bracket can sit flush for a secure fit.

Step-by-Step Installation

Step 1 — Choose your location: Select a mounting spot with clear overhead clearance (min. 7 ft) and away from power lines or overhanging branches.

Step 2 — Mark drill points: Hold the bracket against the surface and mark the four screw hole positions with a pencil.

Step 3 — Pre-drill holes: Drill pilot holes at marked points using a bit appropriate for your surface material.

Step 4 — Secure the bracket: Align the bracket and drive the included screws firmly. For masonry or vinyl, use appropriate wall anchors (not included).

Step 5 — Assemble the pole: Connect the 5 pole sections by sliding each into the next until snug. Do not over-force the joints.

Step 6 — Attach the spinners: Slide the two tangle-free spinners onto the pole before inserting it into the bracket sleeve.

Step 7 — Insert pole into bracket: Slide the assembled pole into the bracket sleeve and tighten the bracket clamp screw with the included hex key.

Step 8 — Attach your flag: Clip or tie your flag to the spinners and adjust the pole angle using the bracket knob to your preferred display position.

Adjustable Pole Length

This versatile flag pole adjusts from 15 to 72 inches (6FT), allowing you to customize the height for any display need. Perfect for porches, balconies, or gardens, this adjustable feature ensures a perfect fit for any setting. Supports from 2x3 to 3x5 nylon flags depending on setup.

Tangle-Free Flying

Our innovative design prevents the flag from wrapping around the pole, ensuring it flies freely and beautifully. The flag is equipped with features that allow it to rotate smoothly.

Returns & Order Review

Before purchasing, please review our verified store return policy to understand eligibility, timeframes, and any conditions that apply to flagpole kits. Our return policy is available on the store's policy page. If you have questions about fit, compatibility, or installation before ordering, contact us — we're happy to help.