The Takedown Tools
This brand store meets Mammoth Nation's America First Standards.
Access exclusive discounts, special perks, and member-only offers.

Trigger Supply AR-10 Super Safety Lever – S7 Tool Steel | Dual-Fin | Gen 1 & Gen 2

Regular Price: $89.99
Member's Price: $85.50
Members Save 5% ($4.49)
Trigger Supply AR-10 Super Safety Lever – S7 Tool Steel | Dual-Fin | Gen 1 & Gen 2
Regular Price: $89.99
Member's Price: $85.50
Members Save 5% ($4.49)
In stock (80)
Trigger Supply · AR-10 Super Safety Lever · S7 Tool Steel · Dual-Fin Tip

The Trigger Supply AR-10 Super Safety Lever is the missing piece that brings the Hoffman Tactical Super Safety active reset system to your AR-10 platform. Machined from S7 shock-resistant tool steel with a dual-fin tip, this lever replaces the AR-15 lever in your existing Super Safety kit — your cam, selector, cam pin, and trigger all carry over unchanged. This is the lever only.

Compatible with DPMS Gen 1, DPMS Gen 2, Armalite, and SR-25 pattern AR-10 platforms. Due to tolerance variation across AR-10 manufacturers, minor gunsmithing may be required for proper fitment.

Read Before Ordering

This is not a guaranteed plug-and-play install. AR-10 platform tolerances vary significantly across manufacturers. Minor gunsmithing — light fitting, polishing, or small material removal — may be required to achieve proper fitment and reliable function. Installation by a qualified gunsmith familiar with AR-10 platforms is strongly recommended. If you are not comfortable with minor fitting work, have a gunsmith install this component.

What Carries Over — What Doesn't

If you already own an AR-15 Super Safety, you have most of what you need. Only the lever is AR-10 specific.

✓ Carries Over From AR-15 Super Safety

Super Safety cam · Selector · Cam pin · Trigger (pre-cut curved)

✕ AR-10 Specific — This Listing

Lever — dual-fin tip, S7 tool steel, AR-10 geometry

Don't Have a Super Safety Yet?

You will need a complete Super Safety kit in addition to this lever. See the full Super Safety lineup — the S7 curved trigger kit is the recommended pairing for this AR-10 lever.

Why S7 Tool Steel — Why It Matters for the Lever

The lever is the hardest-working component in the Super Safety system. On every cycle, the BCG contacts the lever and drives it — and through it, the trigger — forward. That is a shock load on every single round fired. Most levers run in standard tool steel. This one doesn't.

  • Highest impact toughness of any tool steel grade — S7 is engineered specifically for shock loads. The cam absorbs the BCG impact; the lever transfers that force to the trigger. S7 handles that stress better than any other tool steel available
  • Wear surfaces hold their geometry — consistent reset timing over tens of thousands of rounds where standard steel shows wear and begins to affect reset reliability
  • Dual-fin tip design — two contact points on the trigger interface provide more reliable and consistent trigger engagement across the wider tolerance range of AR-10 platform variants
  • Tighter machining tolerances — S7 machines cleanly to tighter specs, meaning a more precise lever geometry from the start

Compatible AR-10 Platforms

DPMS Gen 1 DPMS Gen 2 Armalite Pattern SR-25 Pattern

Minor gunsmithing may be required depending on your specific manufacturer's tolerances. Not compatible with AR-15 lowers — this lever is AR-10 geometry only.

Specs

Material S7 Shock-Resistant Tool Steel
Tip Design Dual-Fin
Compatible Platforms DPMS Gen 1, DPMS Gen 2, Armalite, SR-25 pattern AR-10
Carries Over From AR-15 Kit Super Safety cam, selector, cam pin, curved trigger
Kit Contents Lever only
Installation May require minor gunsmithing — qualified installer recommended
Brand Trigger Supply
Country of Origin USA

Frequently Asked Questions

What AR-10 platforms is this compatible with?
This lever is compatible with DPMS Gen 1, DPMS Gen 2, Armalite pattern, and SR-25 pattern AR-10 platforms. It is not compatible with AR-15 lowers — it is AR-10 geometry only. Minor gunsmithing may be required depending on your specific manufacturer's tolerances.
What parts from my AR-15 Super Safety carry over?
Your existing Super Safety cam, selector, cam pin, and curved trigger all carry over from a standard AR-15 Super Safety kit. Only the lever is AR-10 specific. If you already own a Super Safety, this lever is the only additional component you need to adapt the system to your AR-10.
Is this a plug-and-play install?
Not guaranteed. Due to tolerance variation across AR-10 platform manufacturers, minor gunsmithing may be required — light fitting, polishing, or small material removal. Installation by a qualified gunsmith familiar with AR-10 platforms is strongly recommended. If you are not comfortable with minor fitting work, have a gunsmith install this component.
What is the dual-fin tip design?
The dual-fin tip provides two contact points on the trigger interface rather than a single point. This improves reset reliability and consistency across the wider tolerance range found in AR-10 platform variants — where a single-point tip may have inconsistent contact depending on the host lower's geometry.
Why S7 tool steel for the lever?
The lever takes a shock load on every cycle as the BCG contacts it and drives the trigger forward. S7 is a shock-resistant tool steel with the highest impact toughness rating of any tool steel grade — the same class used in industrial dies where standard steels crack under repeated impact. In the Super Safety lever, S7 means consistent reset geometry and wear surfaces that hold up over tens of thousands of rounds.
Do I need a complete Super Safety kit or just this lever?
If you already run a Hoffman Tactical Super Safety on an AR-15, you need only this lever. Your cam, selector, cam pin, and trigger all carry over. If you do not yet own a Super Safety, you will need a complete Super Safety kit in addition to this lever.

Related Products

Minor gunsmithing may be required for proper fitment due to tolerance variation across AR-10 platform manufacturers. Installation by a qualified gunsmith familiar with AR-10 platforms is strongly recommended. It is the buyer's responsibility to verify compatibility with their specific host platform and to comply with all applicable local, state, and federal laws. Trigger Supply is a brand of TTT Innovations.